AWAY 450 roof box on a car
HOW-TO

How to install a roof box on a car

Published 2 November 2026

THE SHORT ANSWER

You install a roof box in two stages: fit the cross bars to the roof, then clamp the box onto the bars. There is no drilling. You can do it yourself with the installation guide, or have a dealer in your city fit it.

Before you start

Steps

  1. Fit the cross bars. Place them across the roof on the rails and tighten the clamps by hand. The AWAY crossbars take about 10 minutes.
  2. Position the bars. Check both bars are parallel and the same distance from the roof ends on each side.
  3. Lift the box onto the bars. Centre it left to right, with the opening clear of the tailgate.
  4. Clamp the box. Tighten each clamp until the box does not move when you push it.
  5. Test the lid and the lock. Open, close and lock it before you load anything.
  6. Check the tailgate and sunroof. Open both fully to confirm nothing hits the box.

After loading

DIY or dealer?

AWAY boxes come with an installation guide and no drilling is needed. If you would rather not do it yourself, take the car to an AWAY dealer in your city and they will fit it. See the dealer list.

Not sure what you have on your roof? Read roof rails vs cross bars.

THE LINEUP

Shop the range.

AWAY Mako 450 roof box450 L

AWAY Mako 450

Roof box with crossbars

₹34,499₹41,000
View product
AWAY Orca 540 roof box on a car540 L

AWAY Orca 540

Roof box with crossbars

₹37,499₹46,000
View product
AWAY cross bars on a Mahindra XUV700Base

AWAY Crossbars

For cars with roof rails

View product